Notes on the use of turbocharged vehicles
Notes on the use of turbocharged vehicles
In today's era, there are many turbocharged models in the ever-flowing car group, and turbocharging has become a fashion trend. What are the key points for everyone to maintain a normal use cycle?
1. Hot car
Driving a turbocharged model requires a lot of care and better habits. After the car is cold started, let the car warm up in situ, not only to let the water temperature reach the normal value, but also to let the engine oil reach the appropriate working condition temperature. Do not run the car at high speed immediately after starting the car. Since the turbocharger belongs to the high-speed running component, it is necessary to maintain the car oil. If the car is driven at high speed without a hot high-end car, the car oil is still relatively thick, and the actual effect of lubricating is not good. Well, running at high speed right away will keep the engine from getting the maintenance it needs, and if you force the turbine to work at full load, it will increase turbine damage and reduce turbine life.
2.Turn off the flame
Before turning off the engine, you must be careful and wait a little longer. Due to the long-term driving car or the high-speed car, the temperature of the Fawn Car Turbocharger is very high. After parking, the turbo will continue to run for a while due to the inertial force. There must be sufficient room cooling. If the engine is turned off immediately after parking, the supply of the refrigeration system and grease will also be terminated, which will damage the rolling bearings of the car. Therefore, it is recommended to let the engine run for 2-3 minutes before turning off the flame, so that the Turbocharger C7 has sufficient room for cooling.
3. Check
The sealing ring of Turbocharger C9 should be checked regularly. If the sealing ring is invalid, the organic waste gas will enter the engine air intake system according to the sealing ring to make the car oil black. mouth, to avoid the entry of dirt or dirt; while in the Turbocharger C9, there is no need to drop, hit, and grab easily deformable parts such as actuators or crankshafts. Therefore, the buyer of the car should try not to disassemble and assemble the parts without authorization, otherwise the gain will outweigh the loss.